News Center

Quality-oriented-value symbiosis

The entire process of medical equipment shell processing and production

Release time:

2024-04-11

Medical equipment enclosures are widely used, and the demand for them is constantly growing across various industries. Therefore, everyone is focusing on relevant information regarding medical equipment enclosures. This is due to the continuous upgrading of medical equipment in recent years, which has led to the widespread use of medical equipment enclosures. If you are not entirely clear about the role of medical equipment enclosures, then today, I will discuss with you the functions and importance of medical equipment enclosures.

Medical enclosures are a type of shells that have a long service life. A large part of the reason is to protect medical staff from virus infections during work, and medical enclosures also protect the equipment that doctors want to protect from virus invasion. How are medical device enclosures made? Medical device enclosures can be divided into glass fiber enclosures and plastic enclosures according to their materials. Let's take a look at the production process of medical equipment enclosures.

Sheet metal working

Medical equipment shell processing and production process:

1、make wooden models

The processing shape of the glass fiber reinforced plastic medical equipment shell shall be made according to the drawing, and Party A shall confirm whether it needs to be modified until it is completed. The molding master uses the mold to make molding, modification and confirmation, that is, the appearance of the glass fiber reinforced medical device shell.

2、mold production

First make the medical equipment shell processing wood surface treatment, to meet the requirements, and then waxing, and then brush gelcoat to the surface, to be half dry, the fiber cloth spread on the top, start brush resin brush to the top, so that it penetrates, and then brush the resin, layer by layer overlay, to achieve the required thickness. The mold is ready.

3、 stripping, trimming

Stripping is taking the mold out of the wood mold. Cut off the excess edges of the FRP mold. Then the glass fiber reinforced plastic mold is water polished to meet the requirements of mass production.

4、product treatment spray oil

1)First of all, use 180# sandpaper to polish the product again, wear off the release wax on the surface of the product, and fill the pinholes and closed mold lines on the surface of the product with atomic ash.

2)Smooth with 220# sandpaper, spray a coat of primer, select imperfect areas, and fill with atomic soil.

3) Smooth with 360# sandpaper, spray the primer again, then repair the details with fine red and gray.

4) Smooth with 800# sandpaper, start spraying car paint until dry.

5)After the paint dries, the production supervisor checks whether the paint has oil flow and whether the spray leakage is less. After the completion of qualified, the customer's logo or pattern is transferred, and then sprayed with a layer of automotive varnish to ensure product brightness and protect the durability of the paint.

The paint is checked for good condition by quality inspection after drying. After confirming that there is no problem, the products can be packaged and shipped to our customers

Key Words