欢迎访问珠海市椿田机械科技有限公司官网!
News
Quality oriented and value symbiosis

How medical sheet metal fabricating plant the assembly problem?

  • Time of issue:2024-05-16 18:33
  • Views:

How medical sheet metal fabricating plant the assembly problem?

(Summary description)In the outsourcing process of metal stamping parts, it is generally necessary to spray them before assembly. Although this is a simple assembly process, there are still many problems of damage to medical sheet metal parts, resulting in the quality of medical sheet metal parts reaching If the product standards are not met, the following is the assembly process of sheet metal shell processing:  

  • Time of issue:2024-05-16 18:33
  • Views:
Information

How medical sheet metal fabricating plant the assembly problem?
In the outsourcing process of metal stamping parts, it is generally necessary to spray them before assembly. Although this is a simple assembly process, there are still many problems of damage to medical sheet metal parts, resulting in the quality of medical sheet metal parts reaching If the product standards are not met, the following is the assembly process of sheet metal shell processing:  
1. Before assembling the parts of the sheet metal shell, read the assembly process and its waybill carefully.
2. Ship accessories, semi-finished products, purchased parts and other materials in accordance with regulations, and then have dedicated personnel manage and inspect them for storage to prevent consumption and loss.
3. During the assembly process of the medical sheet metal workpiece, semi-finished products and tools should not be placed in high area, so as to avoid the object accidentally slipping and hitting people or goods.
4. In the process of assembling the medical sheet metal workpiece, it is necessary to operate reasonably in accordance with the technics sequence, and pay attention to the upper and lower parts, at the same time, the cooperation of the operator is also very important, the parts shall not be hurt, and the relevant departments can be modified after approval.

Medical sheet metal processing
5 In the sheet metal shell fabricating and assembly process, it is prohibited to place semi-finished products in areas with safety risks, they should be placed in somewhere without moving danger, the purpose is to prevent people from being hit by falling objects. For heavier large workpieces, when erected, moved or flated, there should be a dedicated person in charge to prevent accidents. 
Preparation and precautions before processing in medical sheet metal fabricating plant
About preparations for medical sheet metal processing:
1. Material preparation
The equipment must be prepared, that is, the tools that being used, such as micrometers, micrometers, steel chain measuring tools, and needle tubes. If cold-rolled plates are used, their appearance must be free of scratches, abrasions, rust, and impurities. In other words, they must be free of defects.
2. Prepare for sheet metal processing
Its relevant drawings, technical standards, and scale provisions should be very familiar, understand whether the stainless steel sheet metal fabricating customization information meets the requirements of the technical standards, and the necessary equipment should work smoothly to make it work normally.
Precautions in medical sheet metal processing:
1.When multiple people are acting, they must coordinate with each other and obey unified arrangements and commands;
2. The mechanical equipment itself should meet the requirements of safety regulations, in addition, the operator should operate in accordance with the safety operating procedures of the equipment, shall not violate the operating procedures;
3.The safety of the equipment must be checked before starting work. If there is any problem, it cannot be used directly;
4. The operation of the equipment must not be unattended, so as to avoid problems that cannot be properly handled, resulting in serious consequences;
5. Tools, positioning devices, etc., should be firmly installed on the equipment, should not be loose, to prevent injury.

CHUNTIAN MACHINERY

Quality oriented and value symbiosis

Contact

Address: No.8, Chuangye East Road, Xiaolin District, LIANGANG Industrial Zone, Jinwan District, Zhuhai

Copyright © 2022 Zhuhai ChunTian Machine Technology Co.,Ltd.  粤ICP备2021150249号-1