What are the requirements of medical equipment shell processing?

Time of issue:2024-04-20 18:55
Views:

What are the requirements of medical equipment shell processing?

(Summary description)Regarding the processing process of medical equipment housing, there is indeed a lot of professional knowledge that must be mastered. Only on this basis will it be possible to apply the technology to a higher level and process high-quality medical shells. This medical device provides a stable foundation.

Time of issue:2024-04-20 18:55
Views:

Information

Regarding the processing process of medical equipment housing, there is indeed a lot of professional knowledge that must be mastered. Only on this basis will it be possible to apply the technology to a higher level and process high-quality medical shells. This medical device provides a stable foundation.

According to statistics, the processing process of medical equipment shell is one of the important technologies that sheet metal technicians must master, and it is also the key process of sheet metal product molding. Its key processing technology includes basic processing, laser cutting, bending, injection molding, local processing, processing equipment and other advanced technologies.

The processing of medical equipment shell can be gradually mastered and prepared in advance from the basic principle, production process and application of raw materials, and then the raw materials are stamped, cold stamped, fusing cut, bending, rolling bending, injection molding, flaring and other processes. Materials can be carried out. Shape and other processing technology solutions, coupled with a variety of processing equipment and technology, you can get the required parts.

In order to ensure the processing quality of medical device housing, medical device housing manufacturers in addition to strict management in the production process, but also need to separate the finished product and production inspection. On the one hand, it is necessary to strictly supervise the specifications in accordance with the engineering drawings of the products, and on the other hand, it is also necessary to strictly control the appearance quality of the medical device housing.

If the whole process of product inspection does not meet the standard, it needs to be repaired or damaged immediately; If the appearance of the medical device housing is scratched, it needs to be treated. In addition, the detection of color bias, corrosion resistance and adhesion after coating is also one of the stages of the whole process of medical device housing processing.

Often so much attention is paid to the inspection stage of medical device housing processing, because it is possible to find incorrect development diagrams, bad habits in the process, incorrect processes, in order to be corrected in the future work to improve the quality of medical device housing processing.

Analysis of medical shell materials for small plastic shell processing

The production and processing of medical shell can generally use PC and ABS two raw materials. PC and ABS have certain compatibility. However, the compatibility of PC and ABS is greatly affected by the type specifications, preparation and production process of the two parts. In order to improve the page compatibility better and reasonably, the effective method is to add a concurrent container in the mixed management system. General expansion agents are: Maleic anhydride MAH grafting POE, ABS grafting, PE grafting, polyethylene maleic anhydride grafting prepolymer, acrylic or polymethacrylic acid prepolymer, amine, SAN, component expansion and so on.

PC/ABS aluminum alloy for the production and processing of small and medium-sized plastic shells can combine the best properties of both. On the one hand, it improves the temperature resistance and tensile strength of ABS, on the other hand, it reduces the viscosity of PC solution, improves the production and processing performance, and reduces the sensitivity of thermal stress and impact compressive strength to the material.